This project has moved and is read-only. For the latest updates, please go here.

Binaries available?

Mar 10, 2014 at 4:13 AM
Is there a way I can get the libraries after the compilation? I know it's not released yet but I cannot get this to compile on my computer and I don't want to but a copy of VS2010 just to compile this single project.
Thanks,
~Shane
Mar 10, 2014 at 4:14 AM
FYI WiX 3.5 doesn't seem to work with VS2012 BUT WiX 3.8 does. It looks like there is a lot that would need to be ported to WiX 3.8 To get the installer to install...and that seems like a waste of time :/
~Shane
Mar 12, 2014 at 1:19 AM
I followed these instructions: https://xbee.codeplex.com/discussions/431143 and got it to work :-)
Mar 12, 2014 at 2:33 AM
I'm glad you worked this issue out! If you face any more problems or would like to contribute to the source code dont hasitate!
Mar 12, 2014 at 3:26 AM
I'm looking for a set of commands that will read the values of the ADC pins on an Xbee series 2. Are there any threads that describe this? Is this possible with this API? Thanks -Shane
Mar 12, 2014 at 4:10 PM
Yes I don't see why not. Are we talking about monitoring a remote or local XBee? In case of a remote do you want to query the state or are out fine with the remote XBee sending pin samples to your local XBee? The second case was described here:

https://xbee.codeplex.com/discussions/440465

You need to configure the remote XBee with X-CTU in order for it to send the samples.
Mar 12, 2014 at 4:27 PM
Edited Mar 12, 2014 at 4:28 PM
I'm taking data from a remote Xbee ADC Pin0 and sending it to the local Xbee.

This looks like what I need. We will find out tonight (or tomorrow night!)
Thanks
~Shane
Mar 13, 2014 at 5:42 AM
Ok, the solution in these links works on my CerbuinoBee. Thank you so much for your help and getting this library together.
~Shane
Mar 13, 2014 at 1:11 PM
You are welcome :)